SC320/SC321 | USB Configurable, Dual Band Vibration / Ultrasound Plus Temperature Signal Conditioner

£0.00

Available for use with proximity probe drivers, standard CTC accelerometers & TA200 series, or TA900 Series hazardous rated sensors.

Micro USB port and dedicated software allow for field configuration of input signal, scale values, filtering options and outputs; built-in IEPE supply for powering sensors can be toggled on or off configurations. **USB Configurator Cord Sold Separately

Provides process control signals to a PLC, DCS, or SCADA system that are proportional to the vibration levels set within the signal conditioner.

  • Accepts a variety of signal inputs: acceleration, velocity, temperature and displacement; capable of monitoring ultrasound frequency signals up to 40 kHz

  • Provides two separate band-pass filtered outputs from one single axis sensor input, including the option to select an ultra-sound frequency band

  • An additional built-in temperature output is a standard supplied feature, which may be utilized when using a CTC TA200 series dual output vibration and temperature sensor

Standard ISO 10816-3 configurations are available for accelerometers/velocity input only, and not for proximity probes driver inputs. Please specify your requirements in quotation comments for proximity probe driver inputs, or custom accelerometer settings. Alternatively the settings can be easily altered with the USB interface and free software. Second band is set to 0-10G’s, 1000-5000Hz, 4-20mA output by default on the ISO configured driver.

Input:
Config:
Quantity:
Add To Cart

Available for use with proximity probe drivers, standard CTC accelerometers & TA200 series, or TA900 Series hazardous rated sensors.

Micro USB port and dedicated software allow for field configuration of input signal, scale values, filtering options and outputs; built-in IEPE supply for powering sensors can be toggled on or off configurations. **USB Configurator Cord Sold Separately

Provides process control signals to a PLC, DCS, or SCADA system that are proportional to the vibration levels set within the signal conditioner.

  • Accepts a variety of signal inputs: acceleration, velocity, temperature and displacement; capable of monitoring ultrasound frequency signals up to 40 kHz

  • Provides two separate band-pass filtered outputs from one single axis sensor input, including the option to select an ultra-sound frequency band

  • An additional built-in temperature output is a standard supplied feature, which may be utilized when using a CTC TA200 series dual output vibration and temperature sensor

Standard ISO 10816-3 configurations are available for accelerometers/velocity input only, and not for proximity probes driver inputs. Please specify your requirements in quotation comments for proximity probe driver inputs, or custom accelerometer settings. Alternatively the settings can be easily altered with the USB interface and free software. Second band is set to 0-10G’s, 1000-5000Hz, 4-20mA output by default on the ISO configured driver.

Available for use with proximity probe drivers, standard CTC accelerometers & TA200 series, or TA900 Series hazardous rated sensors.

Micro USB port and dedicated software allow for field configuration of input signal, scale values, filtering options and outputs; built-in IEPE supply for powering sensors can be toggled on or off configurations. **USB Configurator Cord Sold Separately

Provides process control signals to a PLC, DCS, or SCADA system that are proportional to the vibration levels set within the signal conditioner.

  • Accepts a variety of signal inputs: acceleration, velocity, temperature and displacement; capable of monitoring ultrasound frequency signals up to 40 kHz

  • Provides two separate band-pass filtered outputs from one single axis sensor input, including the option to select an ultra-sound frequency band

  • An additional built-in temperature output is a standard supplied feature, which may be utilized when using a CTC TA200 series dual output vibration and temperature sensor

Standard ISO 10816-3 configurations are available for accelerometers/velocity input only, and not for proximity probes driver inputs. Please specify your requirements in quotation comments for proximity probe driver inputs, or custom accelerometer settings. Alternatively the settings can be easily altered with the USB interface and free software. Second band is set to 0-10G’s, 1000-5000Hz, 4-20mA output by default on the ISO configured driver.